• Compare Products

Chalk Marker Holders for Acrylic Boards

From $8.00
main product photo

Keep your Liquid Chalk Markers from getting lost, together and within easy reach with our Chalk Marker Holders for Acrylic Boards. Available in 2 Marker, 6 Marker, and 8 Marker sizes, there's an option to suit everything from a simple setup to a larger marker collection.

Each holder is 3D printed in PLA, a plant-based bioplastic made from renewable resources, and comes with your choice of Magnetic or Removable foam tape backing. Simply choose your holder size, then select your preferred attachment method.

Liquid Chalk Markers are sold separately. If you need both, simply choose one of our Chalk Marker & Holder Sets.

Features and Sizing

  • Holder sizes: 2 Marker Holder, 6 Marker Holder, and 8 Marker Holder
  • Attachment options: Magnetic or Removable foam tape backing
  • Material: 3D printed in PLA plastic, a plant-based bioplastic made from renewable resources
  • 2 Marker: 39.7mm(W) × 23.4mm(D) × 45.5mm(H)
  • 6 Marker: 112.9mm(W) × 23.4mm(D) × 45.5mm(H)
  • 8 Marker: 149.5mm(W) × 23.4mm(D) × 45.5mm(H)

Explore the Range

Warning: Choking Hazard
Small parts. Not for children under 3 years.

Chalk Marker Holders with Magnetic Backing

  1. Place the holder on a clean, dry, suitable magnetic surface.
  2. Check that the holder is secure before adding your Liquid Chalk Markers.

Chalk Marker Holders with Removable Foam Tape

  1. Choose a clean, dry, flat surface that is free from dust. Do not apply to delicate, poorly prepared or freshly painted surfaces. Allow freshly painted surfaces to dry for at least 3 weeks.
  2. Peel the liner from one side of the supplied foam tape, apply the tape to the marked area on the back of the holder and press firmly.
  3. Remove the remaining liner, position the holder carefully against the wall and press firmly over the taped area for 5 seconds.
  4. To remove without damage, empty the holder, ease the lower edge away from the surface and peel upwards very slowly; do not pull it straight off.

FAQs:

Choose from 2 Marker Holder, 6 Marker Holder, and 8 Marker Holder.

2 Marker: 39.7mm(W) × 23.4mm(D) × 45.5mm(H)

6 Marker: 112.9mm(W) × 23.4mm(D) × 45.5mm(H)

8 Marker: 149.5mm(W) × 23.4mm(D) × 45.5mm(H)

Chalk Marker Holders are 3D printed in PLA, a plant-based bioplastic made from renewable resources.

Choose the holder size that matches the number of markers you want to keep together: 2, 6 or 8.

Choose Magnetic or Removable foam tape backing. Select the attachment option before adding the holder to your cart.

No, Liquid Chalk Markers are sold separately. If you need both, simply choose one of our Chalk Marker & Holder Sets.

Recently Viewed
Previous Next